Pairing the Remote

Pair the radio remote controller

1. Open the receiver box inside the grapplesaw

2. Press the small red button marked “F” (LED #7 will illuminate)

3. Press the button marked “S” (All relay-LEDS will illuminate)

4. Press and hold buttons 1 & 2 on the yellow handheld remote until the LEDs on the receiver turn off.

5. The remote is now paired with the receiver

To clear the memory and erase all pairings, press “F” button once and press and hold “S” button for 10 seconds.

© 2024 All rights reserved.

  • 1-877-854-9848