Installing New Saw Bar and Chain

The machine must always be turned off during service and repairs. Always wear proper PPE!

  1. Insert a new saw bar
  2. Put a new chain on the saw bar and sprocket. Start by putting the chain on the top half of the saw bar and then on about half of the sprocket.
  3. Turn the sprocket nut downward until the chain is on.
  4. Tighten the two nuts for the saw bar. (30mm wrench)
  5. Tension the chain

GrapplesawTrucks.com

© 2024 All rights reserved.

  • 1-877-854-9848
  • info@grapplesawtrucks.com