Lease to own/ For Sale 

1 year $13,000 per month

6 month rental 14,000 per month

3 month rental $15,000 per month

1 month rental $20,000

1 week rental $7,000

20k refundable damage deposit at end of term.

Contact Brandon @ 724-979-2104

• 33′ overall package length while traveling
• Designed to distribute weight over all axles evenly
• Relatively low finished package weight
• Annual permitting is not required
• Rock solid build stability—tested to 120% of crane capacity
• Full load chart stable—360 degrees
• Rear-mounted crane for maximum reach benefit
• Optimized for residential tree removals

•    Rear-mounted boom to allow for maximum available crane reach
•    Main boom with 8 Extensions and fly jib with 6 extensions
•    Capacity of 1,560 lbs. at hydraulic vertical outreach of 120′
•    Capacity of 1,500 lbs. at hydraulic horizontal outreach of 108′
•    Active Oscillation Suppression to eliminate boom bounce
•    Fully protected 105-gallon hydraulic oil reservoir with integral heater
•    Thermostatically controlled hydraulic oil cooler
•    Hydraulic quick connect between the main boom and fly jib
•    Eight-function Scanreco radio remote system
•    4200 Lumen boom lights on the main boom and fly jib

•    Automatic tiltable jack legs on crane and rear auxiliary stabilizers
•    Five composite stabilizer pads and pad holders
•    9-ton and 18-ton load hooks
•    Manual boom section for connection of grapple saw
•    Fully proportional load-sensing Danfoss control valve and hydraulic oil pump
•    PAL150 electronic overload control system
•    Capacity percentage readout at stabilizer controls and remote transmitter
•    Installed on High tensile welded torsion box to eliminate frame twist
•    360-degree stability tested to 120% of crane capacity
•    Hydraulic plumbing via formed steel lines wherever possible

• Mecanil SG280 Grapple Saw with storage bracket and spare parts kit
• Rear pintle plate with pintle, d-rings, Reese receiver, backup alarm
• Lighted cab protector with beacons and four light bars
• Six work lights located on the truck perimeter to light work area
• Backup camera and LCD screen in cab with audio coms
• Air connection to chassis air supply for blowing out saws
• Eight 28″ traffic cones and cone storage bracket
• Igloo water cooler and water cooler bracket
• Spare parts kit for grapple saw and crane
• Spare crane transmitter and grapple transmitter
• 1000-watt power inverter to charge grapple batteries
• Sauber Galvanized wheel chocks and chock holders
• In-cab remote control storage bracket
• Winch binder bar
• Custom 24″ x 52″ x 96″ pass-through toolbox with slide-out drawers
• Aluminum axle fenders sprayed with Line-X protective coating
• Nikon Forestry Pro laser rangefinder
• Complete chassis DOT inspection
• OSHA required first annual crane inspection